Power Saving Mode; Location And Security - Samsung SGH-I727R User Manual

Power Saving Mode

This feature allows you set the phone to automatically switch to
power saving mode when the battery is low and configure
additional power saving options.
From the Home screen, tap
saving mode. Tap Use Power saving mode. A check mark
is displayed at the right side and
indicate active status.
To adjust power saving mode:
Activate power saving mode (see above).
1.
Tap Power saving on at to assign the "battery low" level at
2.
which the power saving mode is activated (10% battery
power, 30%, 50% or 70%.
To adjust additional power saving settings:
Activate power saving mode (see above).
1.
Tap any of the available fields to adjust additional power
2.
saving parameters. The following options are available:
• Turn Off Wi-Fi to disable Wi-Fi transmission when not in use or
actively transmitting data.
• Turn Off Bluetooth to disable Bluetooth when not in use or
actively transmitting data.
100
Settings Power
 
in the status bar to
• Turn Off GPS to disable the GPS location system when not in
use.
• Turn off Sync to disable the feature when the phone is not
synchronizing with the server.
• Brightness: allows you to manually adjust the brightness of the
screen. Enable this option to activate the next Brightness option.
• Brightness: sets the Brightness level of the screen.
• Screen timeout to adjust the time delay before the screen turns
off when inactive.
• Power saving tips display additional information on the power
saving features.

Location and Security

The Location and Security settings allow you to configure how the
phone will determine your location and the security settings for
your phone.
Use Wireless Networks
Before you use applications such as Google Maps to find
directions or search for places of interest, you must enable the use
of wireless networks and/or GPS satellites to determine your
position.
From the Home screen, tap
1.
and security.
Settings Location
 