La Crosse Technology BC-1000U Instruction Manual page 18

NOTE:
The discharging current is always set to be half of the charging current whose upper limit

is 1000 mA (see Table 2). Therefore the user is recommended to carefully select the
discharging current so that the charging current afterward will not be too high.
Hold the MODE key for about 1 second to activate the mode change. Press and release

the MODE key to select the ―Charge‖, ―Discharge‖, ―Test‖ and ―Refresh‖ mode.
Table 2. DISCHARGE MODE Current
User-selected Discharging
current
Thereafter Charging current
Finally, batteries will be fully charged in discharge mode and ―Full‖ will be displayed. If the user
presses the DISPLAY key at this time, "charge" icon instead of "discharge" icon will be
displayed.
100 mA 250 mA
200 mA 500 mA
17
350 mA 500 mA
700 mA 1000 mA