Change Alarm Settings - Kyocera Virgin Event User Manual

3. Touch an existing alarm to change the settings or touch Add alarm to add a new one
and set the alarm time.
4. Touch Time to adjust the hour, minute, and AM or PM by touching
sliding each item vertically. When finished, touch Set.
5. Touch Repeat to select a repeat status for the alarm. When finished, touch OK.
6. Touch Ringtone to select a ringtone that will play as an alarm. When finished, touch
OK.
7. Touch Vibrate to check or uncheck the check box to turn the vibration feature for the
alarm on or off.
8. Touch Label to enter a name for the alarm. When finished, touch OK.
9. Touch Turn alarm on to check or uncheck the check box to set the alarm on or off.
10. When finished all of the above, touch OK. (Alarms that are set are checked in blue.)

Touch the check mark next to an alarm to turn it on or off.
To delete an Alarm:
1. Press Home
2. Touch on the screen.
3. From the Alarms screen, touch a desired alarm, and then touch Delete.
4. Touch OK to confirm the deletion.

Change Alarm Settings

1. Press Home
2. Touch on the screen.
3. From the Alarms screen, press Menu
4. Configure the following options.

Alarm in silent mode: Select to sound the alarm even when the device is in silent
mode.

Alarm volume: Select to set the alarm volume.

Snooze duration: Select to set the snooze duration from 5 to 30 minutes in 5-minute
intervals.
Tools and Calendar
, and touch > Clock.
, and touch > Clock.
147
, and touch Settings.
or , or by