Korg microSTATION Operation Manual page 73

M
#
Measure Exceeded
Meaning: Executing the edit would cause the track
length to exceed 999 measures.
Action: Delete unneeded measures.
Media full
Meaning: When you attempted to save a file in Global/
Media mode, there was insufficient free space
on the media.
Action: Either delete an existing file, or use different
media that has sufficient free space.
Media Invalid
Meaning: The selected media is unreadable.
Memory Full
Meaning: When you were editing a song or track in
Sequencer mode, the total amount of all song
data exceeded the sequence data memory
capacity, so no further editing is possible.
Action: Delete other song data to increase the amount
of free memory.
Meaning: During realtime recording in Sequencer
mode, the microSTATION ran out of memory
to hold the recorded data, so recording was
forcibly stopped.
Action: Delete other song data to increase the amount
of free memory.
Memory Protected
Meaning: The program, combination, song, drum kit, or
user arpeggio pattern in the microSTATION's
internal memory is protected.
Meaning: You began the Auto Song Setup process, but
the song is protected.
Action: Use Global/Media mode to turn off memory
protect, and then begin the write, load, or auto
song setup operation once again.
MIDI recv error
Meaning: When receiving MIDI exclusive data, the
received data had a data size mismatch or had
a format that was invalid in some other way.
Action: Check the MIDI connection and the MIDI data.
N
No readable data
Meaning: The file size is 0, or the data to be accessed by
the load or other operation did not exist in the
file. Alternatively, the data content is
damaged and cannot be loaded or accessed.
No media
Meaning: When executing a command in Global/Media
mode, the execution‐destination media is not
inserted.
Action: Insert the media.
No song location
Meaning: When using "Locate": Append to load an
SNG file, the load operation would exceed the
Error messages Various messages
remaining number of songs that can be
loaded.
Action: In Sequencer mode, execute the song
command "Delete" to increase the number of
songs that can be loaded, and then load the
song again.
Not enough mem.
Meaning: When you started realtime recording in
Sequencer mode, the minimum required
amount of free memory could not be
allocated.
Action: Delete other song data to increase the amount
of free memory.
Meaning: When you attempted to load an .SNG file or
Standard MIDI File in Global/Media mode,
there was insufficient free space in sequencer
memory.
Action: Delete other song data to increase the amount
of free memory.
Not formatted
Meaning: You attempted to perform a logical format
(quick format) on the media, but the media
had not been physically formatted.
Action: Use a computer to physically format (full
format) the media.
R
Read failed
Meaning: An error occurred while reading data from
the media.
Action: Try the read operation once again. If the same
error occurs, it may be that the data on the
media is damaged.
Root dir is full
Meaning: The number of allowable entries in the root
directory of the media has been exceeded.
Action: Use a computer to delete files or directories
from the root directory.
69