Korg Pa588 User Manual page 243

2. Open the stand (A) by unfolding the legs (A') and diagonal
bars (A"), as shown in the following illustration.
3. Use the two short screws (b) to fix the diagonal bars (A").
Be sure you insert a washer (d) between the diagonal bar
and the hole in the stand.
4. Prepare the pedal beam (B), by removing the two caps (e)
from both sides.
5. Fit the pedal beam (B) and the legs (A') together, with the
curved part pointing toward the back of the stand (as
shown in the illustration). Fix them by using the two long
screws (a).
6. Lay the pedal (C) on the pedal bar (B).
7. Lift the instrument (D) with two or more people, and fix it
to the stand (A), so that the carved, molded guides on the
bottom of the instrument perfectly match the top of the
stand. Also, be sure the rubber feet exactly match the three
points in each of the left and right stand's stay.
Felt
Assembling the stand
Stand seen from underneath
Stays
239