Korg Pa588 User Manual page 21

Chords are detected below the split point. The
number of notes you should play to form a chord
is defined by the "Chord Recognition Mode"
parameter (see page 99).
Off The Upper 1, Upper 2 and/or Upper 3 tracks play
over the whole keyboard range. The Lower track
does not play. This is called the Full keyboard
mode.
Chords are detected over the full keyboard range.
You must always play three or more notes to let
the arranger recognize a chord (see "Chord Rec-
ognition Mode" on page 99)
Hint: Keep this button pressed to make the Split Point window
appear. While in this window, play the new split point note, and
release the button. The SPLIT will be automatically turned on.
You can jump to the Style Play > Key Velocity page by
keeping SHIFT pressed, and pressing the SPLIT button.
d
TRANSPOSE
These buttons transpose the whole instrument in semitone steps
(Master Transpose). The transposition value is usually shown on
the page header in the display.
Press both buttons together, to reset the Master Transpose to zero.
Note: The Master Transpose has no effect on tracks set to Drum
mode (and, even if set in a different status, on the Drum and Per-
cussion tracks). See "Track Controls: Mode" on page 93, and
"Track Controls: Mode" on page 160.
Lowers the Master Transpose in steps of a semi-
tone.
Raises the Master Transpose in steps of a semi-
tone.
You can jump to the Global > Transpose Control page
by keeping SHIFT pressed, and pressing one of the TRANSPOSE
buttons.
Sty
SB
Front panel 17