Style Controls: Drum/Fill - Korg Pa588 User Manual

Repeat The played note is repeated in sync with the
Tempo parameter (see below). When playing a
chord, only the last note is repeated.
Echo As the Repeat option, but with the repeated notes
fading away after the time set with the Feedback
parameter (see below).
AutoSplit1 If more than a single Upper track is in play, the
Upper 1 track plays the melody in mono, while
the other Upper tracks play the chord notes.
If only the Upper 1 track is in play, it plays poly-
phonically all the chord notes.
AutoSplit2 Similar to AutoSplit1, but the Upper 1 track
always plays the uppermost note.
Note Velocity
This parameter sets the velocity difference between the right-
hand melody and the added harmonization notes.
-10...0 Subtracted velocity value.
Tempo
Note: This parameter only appears when the Trill, Repeat or Echo
options are selected.
Note value for the Trill, Repeat or Echo Ensemble options. This
is in sync with the Metronome Tempo.
Feedback
Note: This parameter only appears when the Echo option is
selected.
This parameter sets how many times the original note/chord is
repeated by the Echo option.
Ensemble Track Assign
Use these parameters to separately set Upper tracks for the
Ensemble function.
Off There is no harmonization on this track.
Normal This track is included in the harmonization.
Mute This track only plays the Ensemble notes, but not
the original note.
Play/Mute icon
Track's play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Style Play operating mode

Style Controls: Drum/Fill

In this page you can select various general parameters for the
Style.
Drum Mapping (Var.1...Var.4)
The Drum Mapping lets you select an alternative arrangement of
percussive instruments for the selected Drum Kit, without any
additional programming. Just select a Drum Map, and some
percussive instruments will be replaced with different instru-
ments.
Off Standard mapping.
Drum Mapping 1...7
Drum Map number. Mapping 1 is "soft-sound-
ing", while mapping 7 is "loud-sounding".
Kick and Snare Designation
The Kick Designation replaces the original Kick (Bass Drum)
sound with a different Kick of the same Drum Kit, while the
Snare Designation replaces the original Snare Drum sound with
a different Snare of the same Drum Kit.
Hint: Select different Designations while listening to the Style, and
see how they affect the Style. When you like the result, save your
setting to a Performance or Style Performance.
Off Original Kick or Snare.
Type 1...3 Kick or Snare replacing the original one.
97
Style Controls: Drum/Fill
Sty
Sty