Operation Of Hands-Free Phoning; Connecting A Bluetooth Device; Receiving A Call; During A Call - Kenwood DPX-U6120 Instruction Manual

Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory)

Operation of hands-free phoning

SRC
4 ¢
LOG
Connecting a Bluetooth Device
Before use the Bluetooth device, you need to
connect Bluetooth device to this unit. The following
3 steps procedure is necessary.
Step 1. P airing (Registering from Bluetooth
devices)
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing).
1
Turn on this unit
Press the [SRC] button.
2
Start registering a this unit by operating the
Bluetooth device
By operating the Bluetooth device, register the
hands-free unit (pairing). Select "KCA-BT200"/ "KCA-
BT300" from the list of connected units.
3
Enter a PIN code
Input the PIN code ("0000") in the Bluetooth
device.
Check that registration is complete on the
Bluetooth device.
✍ PIN code is set to "0000" as the default. You can
change this code. Refer to <Registering PIN
Code> (page 44).
4
By operating the Bluetooth device, start hands-
free connection.
Step 2. C onnection
If you have registered 2 or more cell-phones, you
need to select one of them. For more details,
see <Selecting the Bluetooth device You Wish to
Connect> (page 44).
When a cell-phone is connected, the "BT" indicator
is light up.
Step 3. H ands-free phoning
You can do hand-free phoning when the
connection is made.
20
|
DPX-U6120/ DPX-U5120/ DPX-MP3120
1 – 6
DISP
ATT
VOL
⁄
•
When registering from this unit, refer to <Registering
Bluetooth device> (page 43).
Receiving a Call
Answering a Phone Call
Press the [VOL] knob.
⁄
•
The following operations disconnect the line:
- Insert a CD.
- Connect a USB device.
•
The name of the calling party is displayed if it has already
been registered in the Phone Book.
Rejecting an Incoming Call
Press the [SRC] button.
During a Call
Disconnecting a Call
Press the [SRC] button.
Switching to the Private Mode
Press the [6] button.
Switches between Private talk ("PRIVATE") and
Hands-free talk each time this button is pressed.
⁄
•
Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the Voice Volume during a Call
Turn the [VOL] knob.
Call Waiting
Answering Another Incoming Call with the
Current Call Suspended
1
Press the [VOL] knob.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select "ANSWER".
Answering another Incoming Call after
Terminating the Current Call
Press the [SRC] button.