Roland DP990F Implementation page 2

○Expression (Controller number 11)
Status 2nd byte 3rd byte
BnH 0BH vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Expression: 00H-7FH (0-127), Initial Value = 7FH (127)
* This adjusts the volume of a Part. It can be used independently from Volume
messages. Expression messages are used for musical expression within a
performance; e.g., expression pedal movements, crescendo and decrescendo.
* Not received when Rx.EXPRESSION = OFF. (Initial value is ON)
○Hold 1 (Controller number 64)
Status 2nd byte 3rd byte
BnH 40H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control value: 00H-7FH (0-127)
* Not received when Rx.HOLD1 = OFF. (Initial value is ON)
○Portamento (Controller number 65)
Status 2nd byte 3rd byte
BnH 41H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control value : 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON
* Not received when Rx.PORTAMENTO = OFF. (Initial value is ON)
○Sostenuto (Controller number 66)
Status 2nd byte 3rd byte
BnH 42H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control value: 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON
* Not received when Rx.SOSTENUTO = OFF. (Initial value is ON)
○Soft (Controller number 67)
Status 2nd byte 3rd byte
BnH 43H vvH
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Control value: 00H-7FH (0-127) 0-63 = OFF, 64-127 = ON
* Not received when Rx.SOFT = OFF. (Initial value is ON)
* Some Tones will not exhibit any change.
○Filter Resonance (Timbre/Harmonic Intensity)(Controller
number 71)
Status 2nd byte 3rd byte
BnH 47H vvH
n = MIDI channel number:
vv= Resonance value (relative change):
* Some Tones will not exhibit any change.
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
○Release Time (Controller number 72)
Status 2nd byte
BnH 48H
n = MIDI channel number:
vv = Release Time value (relative change):
* Some Tones will not exhibit any change.
○Attack time (Controller number 73)
Status 2nd byte
BnH 49H
n = MIDI channel number: 0H-FH (ch.1-ch.16)
vv = Attack time value (relative change):
* Some Tones will not exhibit any change.
○Cutoff (Controller number 74)
Status 2nd byte
BnH 4AH
n = MIDI channel number:
vv = Cutoff value (relative change):
* Some Tones will not exhibit any change.
○Decay Time (Controller number 75)
Status 2nd byte
BnH 4BH
n = MIDI channel number:
vv = Decay Time value (relative change):
* Some Tones will not exhibit any change.
○Vibrato Rate (Controller number 76)
Status 2nd byte
BnH 4CH
n = MIDI channel number:
vv = Vibrato Rate value (relative change):
* Some Tones will not exhibit any change.
○Vibrato Depth (Controller number 77)
Status 2nd byte
BnH 4DH
n = MIDI channel number:
vv = Vibrato Depth Value (relative change): 00H-7FH(-64 - 0 - +63),
* Some Tones will not exhibit any change.
○Vibrato Delay (Controller number 78)
Status 2nd byte
BnH 4EH
n = MIDI channel number:
vv = Vibrato Delay value (relative change):
* Some Tones will not exhibit any change.
2
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
3rd byte
vvH
00H-7FH(-64 - 0 - +63),
Initial value=40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
Initial Value = 40H (no change)
3rd byte
vvH
0H-FH (ch.1-ch.16)
00H-7FH(-64 - 0 - +63),
Initial value=40H (no change)