Coping Sets Of User Programs Stored In The User Memory To Disks (Kr-7); Using The Pedal To Switch User Programs; Simultaneously Switching User Program And Transmitting Pc Numbers - Roland KR7/5 Owner's Manual

Chapter 5 User Program Registration
Coping Sets of User Programs
Stored in the User Memory to
Disks (KR-7)
You can take User Program sets saved in user memory and
copy them to floppy disks.
In this case, in the Copy User Programs screen in Step 4
above, touch the large arrow icon in the center to get the
arrow to point up. This sets the KR-7 to copy the User
Program set in the user memory to the floppy disk.
The rest of the procedure is identical to that used for copying
sets of User Program set from disks to user memory.
Using the Pedal to Switch
User Programs
You can use the Pedal as a dedicated switch for selecting
User Programs in order.
1.
Press the [User Program] button.
2.
Touch <Option> in the lower part of the screen.
3.
Touch to display screen like the
following.
fig.d-upgopt.eps_50
4.
Touch to select the setting.
Display Explanation
You can use a function assigned to the
Off
pedal.
The left pedal is dedicated to switching
Left Pedal User Programs.The function assigned to
the left pedal cannot be used.
The center pedal is dedicated to switch-
Center Pedal ing User Programs.The function assigned
to the center pedal cannot be used.
Touch <Exit> to return to the User Program screen.
116
Simultaneously Switching
User Program and
Transmitting PC Numbers
You can have PC (Program Change) numbers be transmitted
to an external MIDI device when you switch the User
Program on the KR.
You can register PC number settings to each of the User
Programs, just as you can with button settings and other
settings preferences.
Calling Up the Performance Settings to Be Set
1.
Press the [User Program] button, then touch the name
of the performance setting you want to set.
Setting the Transmission of the PC
2.
Touch <PC Set> in the User Program screen.
The following type of screen appears.
fig-upgPCset.eps_50
3.
Touch for the parameter and make the
settings.
Display Description
This prevents the PC number from being
Tx PC
transmitted (Off), or sets the transmission
Channel
channel (Channel 1–16).
Bank
Sets the Bank Select LSB.
Select LSB
Bank
Sets the Bank Select MSB.
Select MSB
Program Sets the Program Change messages (Pro-
gram Numbers).
Change
4.
Touch <Exit>.
The User Program screen returns to the display.
Touch <Write> to save the setting to the User Program.
For more detailed information, refer to "Saving
Performance Settings (User Program)" (p. 112).