Section 5: Heater Installation; General; Handling; Shelf Mounting And Suspension - Roberts Gorden DUAL AIR DAT100 Installation, Commissioning, Operation & Service Manual

SECTION 5: HEATER INSTALLATION

5.1 General

®
DualAir units are designed for installation above
2.5 m. When connected to duct delivery systems
any suitable location will be acceptable.
For floor mounting, the DualAir
directly on its base.

5.2 Handling

®
All DualAir units have steel channel sections at the
base to be used to support the equipment. Three
steel sections are also provided across the top of the
unit for support. The DualAir
suspended from these top sections.
®
The DualAir unit is heavy and proper handling
equipment must be used by trained engineers.

Figure 3: Suspension Methods

®
unit may stand
®
unit may be

5.3 Shelf Mounting and Suspension

For typical suspension See Page 9, Figure 3.
SECTION 5: H I
EATER NSTALLATION
9