Table of Contents
Advertisement
4-5. Installing the electrical box
5
6
7
4-6. connecting the power switch cord (Japan and general export area)
2
A
5
4
4-7. Installing the operation panel (IP-110 (D))
2
3
8
1
2
3
4
1
6
9
B
7
8
3
1
3
3
Install the electrical box on the underside of the
table at the location illustrated using round-head
bolt 1 , plain washer 2 , spring washer 3 and nut
4 supplied with the machine, and using bolt having
hexagonal indentation on the head 5 , plain washer
6 and spring washer 7 supplied with the machine.
1) Loosen screw 1 located on the side of the power
switch supplied as accessories and remove the
power switch cover.
2) Connecting the input power cord of electrical box
¡When the input power cord of electrical box is 4P
Put 4P cord from hole A of the power switch and
securely fix green/yellow cord to 5 , white cord to 2 ,
black cord to 3 and red cord to 4 with screws.
¡When the input power cord of electrical box is 3P
Put 3P cord from hole A of the power switch and
securely fix green/yellow cord to 5 , brown cord to
2 and sky blue cord to 3 with screws.
3) Connecting the power cable supplied as accessories
¡In case of 3-phase power cable
Put power cable from hole B of the power switch,
and securely fix green/yellow cord to 9 , white
cord to 6 , black cord to 7 and red cord to 8 with
screws.
¡In case of single phase power cable
Put power cable from hole B of the power switch,
and securely fix green/yellow cord to 9 and other
cords to 6 and 7 with screws. 8 is not used.
4) Installing the power switch cover
Securely tighten screw 1 located on the side of
the power switch.
1) Install operation panel 1 on the machine head
using screws 3 which have been assembled to
panel installing bracket 2 .
1. Do not disassemble the operation
panel to prevent it from breakage.
2. clamp the cord coming from the
panel and that of the machine head
with the clip band supplied as
accessories.
- Quick Links:
- Name of each Component
Hide quick links:
Advertisement
Table of Contents
