Shipping Contents; Assembly - Jet JMS-10SCMS Benchtop Series Operating Instructions And Parts Manual

Shipping Contents

Unpacking
1. Remove the contents from the shipping
container.
2. Compare the contents of the shipping
container with the list found below. Make
certain that all items are accounted for
before discarding any packing material.
Report any shortages or damage to your
JET distributor.
Contents of the Shipping Container
A Compound Miter Saw (1)
B Dust Bag (1)
C Hold-down Clamp (1)
D Lock Knob (2)
-- Owner's Manual (1)
-- Warranty Registration Card
Tools Supplied for Assembly
E Blade Wrench
Tools not included
00Adjustable Wrench
006mm Hex Wrench
00Crosspoint Screwdriver
00Slotted Screwdriver
00Combination Wrench
Read and understand all
assembly instructions before attempting
assembly! Failure to comply may cause
serious injury!
Note: Optional work support extensions (stock
no. 707111) are available for your miter saw.
Contact Walter Meier customer service to order.

Assembly

Unlocking the Slide Carriage
Loosen the slide carriage lock knob (A).
When transporting or storing the miter saw, the
slide carriage (B) should always be locked in
position.
C
Contents of Shipping Container
10
E
D
Figure 1