Pattern Selector Dial; Stitch Length Dial; Reverse Stitch Control - Janome TB-12 Instruction Book

q
q
0 1 2 3 4
S.S.

Pattern Selector Dial

Raise the needle and presser foot. Turn the
pateern selector dial to set the setting mark at the
symbol corresponding to the desired pattern.
q Setting mark
NOTE:
To avoid needle or fabric damage, make sure
the needle is up and out of the fabric while
selecting a stitch.

Stitch Length Dial

Turn the stitch length dial to set the setting mark
at the desired stitch length.
The higher the number, the longer the stitch length
q Setting mark
• Adjust the dial in the 0.5–4 range when you
sew the zigzag stitch.
• Set the dial at "S.S." to sew the stretch stitch
pattern sewing.
• If the stretch stitch pattern is not uneven, turn
the stitch length dial in the direction of "–" to
compress it, or "+" to expand it.

Reverse Stitch Control

Press the stitch control to sew in reverse.
26