Janome Sewing Machine Instruction Book page 18

Threading the Bobbin Winder
e
r
w
e r
q Pull the clutch knob away from the machine to
disengage the clutch.
w Draw the thread from the spool.
Guide the thread around the thread guide.
e
r Guide the thread around the bobbin winder thread
guide.
Insert the thread through the hole the bobbin,
t
threading from the inside to the outside.
16
t
y
y Put the bobbin on the bobbin winder spindle, and push it to the right.
q
With the free end of the thread held in your hand, depress the foot control.
u
Stop the machine when it has made a few turns, and cut the thread close to the hole
o
in the bobbin. Depress the foot control again. When the bobbin is fully wound, it will
sotp automatically.
Return the bobbin winder to its original position by moving the spindle to the left, and
i
cut the thread as shown.
Push in the clutch knob to engage clutch.
o
* The machine will not sew untill the clutch knob is pushed in.
u i