Twin Needle Sewing - Janome Sewing Machine Instruction Book

q w e
c
n
z
x
v
b
q

Twin Needle Sewing

q Stitch pattern:
w Thread tension dial: 3 to 6
e Presser foot:
NOTES:
• When you sew patterns with the twin needle, test
the stitches before you begin to sew.
• Use zigzag foot A or satin stitch foot F for twin
needle sewing.
• Turn off the machine before changing the needle.
• Replace the twin needle with a single needle when
twin needle sewing is finished.
• Starting to sew
Use the extra spool pin for twin needle sewing.
Place two spools of thread as shown.
Draw both threads from the spools and thread them
through the points from z to n.
Make sure that the two strands of thread do not get
tangled.
Turn the power switch on and select the desired
pattern.
Press the twin needle button q, draw the both threads
to the back or left of the foot.
NOTES:
• When changing the sewing direction, raise the
needle and turn the fabric.
• When you select stitch patterns not for twin needle
sewing and press the twin needle button, the twin
needle mark will blink on the LCD display and the
caution buzzer sound.
• Stitch patterns cannot be memorized in the twin
needle mode.
• Use the thread cutter on the face cover when
trimming threads.
• Use thin threads #60 or larger number for the twin
needle sewing.
Stitch Patterns for Twin Needle Sewing
MODE 1, 2
MODE 3
48
Mode 3: 61 (example)
Satin stitch foot F
Custom crafted zigzag foot F2