Bridge Stitches - Janome Sewing Machine Instruction Book

z x
c v
b
q

Bridge Stitches

Patterns #55 to #58 (
stitches which are used to insert straight stitches
between stitch patterns.
The bridge stitches #57 and #58 use the stitch length
and needle drop position of the previous pattern in the
programmed pattern combination.
The needle drop position and stitch length of patterns
#55 (mode 3) and #56
However, the needle drop position and stitch length of
patterns #57 (mode 3) and #58
adjusted. The needle drop position and stitch length
remain same as the previous pattern.
NOTE:
Use bridge stitch patterns #55 or #56 when the stitch
length of the previous stitch pattern is too fine (such
as satin stitches).
Example: Patterns #22 and #57 (mode 3)
z Select pattern 22 (mode 3).
x Press the memory key.
c Select pattern 57 (mode 3).
v Press the memory key.
b Start sewing. Two counts of straight stitch q are
inserted between the stitch pattern 22.
• To insert a space between patterns
Example: Patterns #64 and #91
z Select pattern 64 (mode 3).
x Press the memory key.
c Select pattern 91 (mode 3).
v Press the memory key.
b Start sewing. A 5 mm space will be inserted
between the patterns.
Spaces (Default stitch length)
Pattern #91 (Mode 3)
Pattern #97 (Mode 4 and 6)
Pattern #98 (Mode 4 and 6)
Pattern #99 (Mode 4 and 6)
NOTE:
The space can be varied from 0.5 to 5.0 by adjusting
its stitch length.
51
) in mode 3 are bridge
(mode 3) can be adjusted.
(mode 3) cannot be
5 mm
2.5 mm
3.5 mm
5 mm