Rinnai RHFE-431FA Owner's Operation And Installation Manual page 29

Energysaver gas direct vent wall furnace
Hide thumbs Also See for RHFE-431FA:
Table of Contents

Advertisement

This equipment is for 120 V AC (60Hz) only. Do not use power source other than what is listed.
Caution
G Should the type of gas or power source be different, please contact your dealer. Using a different
type of gas or power source may affect the performance or may be dangerous.
G If you are moving to another area, please check the types of gas and power source provided in the
area. If the types of gas and power source are different, adjustment or modification is necessary.
Please consult the gas provider in the new area.
Usage
I Do not use for drying clothes!
Do not use for any other purposes other than heating
(e.g., drying the laundry).
Draping clothes over the unit blocks the warm air outlet or the filter area and is very dangerous,
as it causes heat to build up inside the unit.
Usage Location
I Do not use near flammable material ! ! !
Place the unit sufficiently away from flammable objects such as furniture, wall and curtains. Check
carefully when installing the unit.
REQUIRED DISTANCE FROM FLAMMABLES:
Top:
At least 250mm or (10")
Left:
At least 50mm or (2")
Front: At least 1m or (40")
I Watch for falling objects ! ! !
Do not place under a shelf or in other locations where there is a danger of an object falling on the unit.
I Avoid using in special purpose rooms ! ! !
This equipment is made for use as a heater for a residential building. Do not use in beauty salons,
factories and other places where spray or chemicals are used or where a large amount of dust is
present.
Do not use hair treatment products containing silicon in a room heated by the Forced flue heater, as they
may cause ignition error, flame extinction or other malfunctions.
Right: At least 50mm or (2")
– 27 –
10"
2"
40"
0"
2"

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents