Ibanez RGD Instruction Manual page 44

Tight-End bridge / Tight-End R bridge (for 6-string and 7-string)
■
Tight-End
Intonation adjustment bolt
String height adjustment screw
ADJUSTING THE ACTION
1 Use an Allen wrench (2 mm) to loosen the saddle lock bolts.
2 To adjust the saddle height, use the Allen wrench (2 mm) to turn the
saddle height adjustment screws.
When you ve fi nished making adjustments, tighten the saddle lock bolts.
ADJUSTING THE INTONATION
1 Use an Allen wrench (2 mm) to loosen the saddle lock bolts.
2 Use a Phillips screwdriver to adjust the saddle position by turning the
intonation adjustment bolt.
3 Use an Allen wrench (2 mm) to tighten the saddle lock bolts, and use
a Phillips screwdriver to lightly tighten the intonation adjustment screw
in the clockwise direction. (Tighten lightly, so as not to affect the saddle
position.)
STRING REPLACEMENT
To install a new string, pass it through the string stopper ferrule from the back of the guitar body.
42
Saddle lock bolt
■
Tight-End
Intonation adjustment bolt
String height adjustment screw
Saddle lock bolt