Uninstalling The Integration - HP Data Protector A.06.11 Integration Manual

6 Uninstalling the integration

Uninstall the SIP integration as follows:
1. Remove the Data Protector Organization.
a.
Start the SIP Configuration Editor:
• On Windows: Start: Programs -> HP OpenView -> Service Information
• On UNIX: /opt/OV/SIP/bin/SIPConfig
b. Under UserRole Packages, remove the DP organization from the management
data, roles and users.
2. Delete the imported customer model.
a.
Log in to SIP as admin.
b. Navigate to the Customer Model tab.
c. Scroll to the Customer Model Sources section.
d. Select the url:
http://servlet_host.com/dpreporter/customer
where servlet_host.com is the fully qualified host name of the web
server on which the servlets are installed.
e. From the customer model sources textbox, click Delete.
f. Click Apply at the bottom of the page.
3.
Uninstall the Data Protector integration.
• On Windows:
Go to Control panel -> Add and Remove Programs -> Data Protector-SIPIn-
tegration -> Remove
• On HPUX:
Use swremove to uninstall the integration:
• If the Web server and SIP server are on the same machine:
Portal -> Configuration Editor (or from a command prompt, type: SIP-
Config).
nl
swremove DP-SIP DP-SIP-Servlets DP-SIP-Setup
Integration guide for HP Service Information Portal 53