Omniupload - HP Data Protector A.06.11 Command Line Interface Manual

omniupload

uploads information about a backup device from an ASCII file to the Data Protector
internal database (IDB)
nl
(this command is available on systems with the Data Protector User Interface
component installed)
omniupload
SYNOPSIS
omniupload -version | -help
omniupload -create_device FileName
omniupload -modify_device BackupDevice [-file FileName]
omniupload -remove_device BackupDevice
omniupload -create_library FileName
omniupload -modify_library Library [-file FileName]
omniupload -remove_library Library
DESCRIPTION
Uploads a backup device file to the Data Protector internal database (IDB).
Information on Data Protector backup devices is stored in the IDB. To configure a
backup device, information on this device must be downloaded into a file. This is
done using the omnidownload command. The file is then modified and uploaded
back to the IDB.
OPTIONS
-version
Displays the version of the omniupload command.
-help
Displays the usage synopsis for the omniupload command.
-create_device FileName
Specifies the ASCII file containing the information about the backup device. This
option is used to create a new backup device. If - is specified as FileName
then data is read from stdin.
-modify_device BackupDevice
Uses the information in the uploaded file to modify an existing backup device in
the IDB. If no filename is specified using the -file option the command searches
Command line interface reference 269