[-Sourceprotect {None | Weeks N | Days N | Until Date | Permanent}]; Locationpriority Mediumlocation [Mediumlocation]; No_Monitor; No_Auto_Device_Selection - HP Data Protector A.06.11 Command Line Interface Manual

-log_dirs
Specifies the logging level of the object copy session. If this option is specified,
only the directories are logged into the database. By default, the filename and
backup history of each backed up file is written to the catalog database.
-log_file
Specifies the logging level of the object copy session. All detailed information
about backed up files and directories (filenames and file versions) is logged to
the Data Protector internal database (IDB). This information allows you to search
for backed up files and allows Data Protector to fast position the tape. It also
does not take much space since some information on file details (file attributes)
is not logged to the database.
-sourceprotect {none | weeks n | days n | until
manent | keep}
Sets the level of protection for the source object after a successful copy. The
media containing this source object cannot be overwritten until the protection
expires. By default (if this option is not specified), the protection is not changed.
The none option specifies that protection is removed from the source object
immediately, allowing recycling.
The keep option can only be specified at the object level and specifies that the
protection for that source object should not be changed. -sourceprotect
keep is equivalent to the old —no_recycle option, which is deprecated.

-locationpriority MediumLocation [MediumLocation]

The order in which media are selected for the object copy in case that the same
object version exist in more than one location. By default, Data Protector
automatically selects the most appropriate media set. Media location priority is
considered if more than one media set equally matches the conditions of the
media set selection algorithm.
The priority must be specified in the form "=MediumLocation" (equal to) or
"<MediumLocation" (lower priority than).
If you specify -locationpriority "=Loc1" "<Loc2" "=Loc3" "<Loc4",
than Loc1 has the highest priority, Loc2 and Loc3 have a lower priority, and
Loc4 has the lowest priority.

-no_monitor

If this option is used, the command displays only the session ID. By default, the
command monitors the session and displays all messages.

-no_auto_device_selection

If this option is specified, Data Protector does not automatically replace
unavailable devices with available devices of the same device tag.
Command line interface reference
Date | per-
183