Viewing Hp Apa Statistics - HP -UX 11i v3 Administrator's Manual

Auto port aggregation
Hide thumbs Also See for HP-UX 11i v3:
Table of Contents

Advertisement

Anytime its Operation Status (ifOper) status is DOWN (the link cannot carry network
traffic) or
If the link is part of an automatic link aggregate and the protocol has failed to maintain the
membership of the port in the link aggregate.
Mar
3 08:49:54 hpserver1 vmunix: APA/LM: Product is now running.
Mar
3 08:49:54 hpserver1 vmunix: APA/LM: Product is now stopped.
Mar
3 08:50:20 hpserver1 vmunix: APA/LM: LA:lan900 - lan7 is up
Mar
3 08:50:20 hpserver1 vmunix: APA/LM: LA:lan900 is up
Mar
3 08:50:20 hpserver1 vmunix: APA/LM: LA:lan900 - lan8 is up
Mar
3 08:50:20 hpserver1 vmunix: APA/LM: LA:lan900 - lan9 is up
Mar
3 08:51:34 hpserver1 vmunix: APA/LM: LA:lan900 - lan8 is down
Mar
3 08:50:26 hpserver1 vmunix: APA/LM: LA:lan900 - lan9 is removed
Mar
3 08:52:05 hpserver1 vmunix: APA/LM: LA:lan900 - lan7 is down
Mar
3 08:52:05 hpserver1 vmunix: APA/LM: LA:lan900 is down
.
.
.
Mar
3 08:50:26 hpserver1 vmunix: APA/LM: LA:lan900 - lan8 is removed
Mar
3 08:50:26 hpserver1 vmunix: APA/LM: LA:lan900 - lan7 is removed
Mar
3 08:50:26 hpserver1 vmunix: APA/LM: LA:lan900 is cleared
The /sbin/init.d/hpapa start command was issued, for example, at system boot
1
time.
The /sbin/init.d/hpapa stop command was issued.
2
Link aggregate (LA) 900 was created with three links 7, 8, and 9.
3
Link 8 is not operational.
4
Link 9 was removed from lan900; for example, by issuing the following command:
5
# nwmgr -d -A links=9 -I 900 -S apa
Link 7 and link aggregate 900 are not operational.
6
Link aggregate 900 was cleared; for example, by issuing the following command:
7
# nwmgr -d -A links=all -I 900 -S apa
If link aggregate 900 is a failover group, lan900 has a FOG: prefix instead of LA: as shown in
the previous example.
For failover groups and Hot-standby mode link aggregates, the current active link is also displayed
as in the following example:
Mar
3 08:58:03 hpserver1 vmunix: APA/LM: FOG:lan900 - lan1 is up (lan1 is active)
Mar
3 08:58:03 hpserver1 vmunix: APA/LM: FOG:lan900 is up (lan1 is active)
Mar
3 08:58:03 hpserver1 vmunix: APA/LM: FOG:lan900 - lan2 is up (lan1 is active)
.
.
.
Mar
3 08:58:03 hpserver1 vmunix: APA/LM: FOG:lan900 - lan2 isn't receiving poll
Mar
3 08:58:03 hpserver1 vmunix: APA/LM: FOG:lan900 - lan2 now receiving poll \
packets (lan1 is active)
Mar
3 08:58:03 hpserver1 vmunix: APA/LM: FOG:lan900 - Proactive Failover Occurred \
(lan901 is active)
Connectivity among links in the failover group was lost.
1
The link in the failover group started receiving poll packets; it has recovered connectivity.
2
Proactive failover occurred in the failover group.
3
For detailed log messages, use the NetTL subsystem. See nettl(1M) for more information.

Viewing HP APA statistics

The link aggregate software keeps a counter for each statistic defined in RFC 1213 MIB II for
32-bit statistics or RFC 2863 for 64-bit statistics. Each counter is set to the negative of the sum of
all the physical ports in the link aggregate when it is created. When reporting the value of a
44
Administering HP APA
2
3
1
2
3
4
5
6
7
1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents