Removing And Installing The Doors - Haier HB21FWRSS Installation And User Manual

Removing and installing the doors

In the event that you need to remove the refrigerator doors, please follow the door removal
and installation instructions below.
It is suggested, for your safety, to have two or more people to assist you in completing the
below task to avoid injury, product damage or property loss.
Right hand door removal and installation
1. Remove the screws on the top hinge cover, then
place the top hinge cover to one side for re-
installation.
When lifting up the hinge and separating it from the door body, please be careful to support
the door to stop it falling forward.
Left hand door removal and installation
1. First remove the top hinge cover.
2. Using a screwdriver, remove the top hinge screws. Remove the hinge,
then take the refrigerator door off and place it to one side for the time
being.
4. Re-install the refrigerator door in reverse sequence.
2. Disconnect the wire cable connector and the water pipe connector.
Remove the hinge screws using a screwdriver, take off the hinge, then
remove the door body and place it in a safe place.