Before You Begin; Estimated Assembly/Set-Up Time - Razor E500S Owner's Manual

BEFORE YOU BEGIN

Remove contents from box. Remove the foam separators that protect the components from damage
during shipping. Inspect the contents of the box for scratches in the paint, dents or kinked cables that may
have occurred during shipping. Because the E500S scooter was 95 percent assembled and packed at the
factory, there should not be any problems, even if the box has a few scars or dents.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult with experience in bicycle mechanics.
Allow up to 20 minutes for assembly, not including initial charge time.
Allow up to 12 hours for initial charge (see page 3 for charging information).
Front Brake Lever
Speed Control
Front Fork
Charger
Charger
Port
Charger
Plug
Required Tools
Some tools may be supplied; however, we recommend the use of mechanic's grade tools. Use the
supplied tools only as a last resort.
5 mm
hexagonal key wrench
(included)
Need Help? Visit our web site for updates and a list of authorized service centers at www.razor.com or
call toll-free at 866-467-2967 Monday - Friday 8:00 AM - 5:00 PM Pacific Time.
Rear Brake Lever
Brake Lever
Adjuster
Kick
Stand
10/15 mm wrench
(included)
2
Wheel
Tire
Stem
Collar
Collar Bolts
On/Off Switch
Charger Port
Bicycle-style tire pump for
Schrader valve tires, with
pressure gauge
WARNING:
DO NOT USE NON-RAZOR
PRODUCTS WITH YOUR
RAZOR E500S SCOOTER. The
scooter has been built to certain
Razor design specifications.
The original equipment supplied
at the time of sale was selected
on the basis of its compatibility
with the frame, fork and all
other parts. Certain aftermarket
products may or may not be
compatible.