Leaving User Calibration - Raymarine ST60 Owner's Handbook Manual

28
3. Hold down the disp and true/app keys for approximately 2 seconds to enter
User calibration then use the disp key to select the wind angle screen (see the
User calibration
4. Sail directly into the wind and adjust the analog pointer to zero, using the
vmg
racy due to sea conditions, and errors become apparent during subsequent
tack operations, repeat this procedure to achieve alignment accuracy.
5. Display the wind speed units screen.
6. Use the vmg and tack keys to select the units you want, either knots (KTS) or
meters per second (M/S).
Any speed unit changes will be applied to other SeaTalk instruments.
Note:
User calibration

Leaving User calibration

Hold down the disp and true/app keys for 2 seconds to save your settings, exit
User calibration and resume normal operation.
ST60 Wind & Close Hauled Wind Instrument Owner's Handbook
flow diagram).
and tack keys. If you are unable to achieve the required degree of accu-
Hold down and
disp
Entry screen
TRUE
disp
Wind angle
TRUE
Wind speed
units
TRUE
true
for approximately 2 seconds
app
APP
vmg
(decrease)
to set the current wind angle
APP
to set the required wind
APP
speed units (KTS or M/S)
Press either
or
tack
(increase)
Press either
or
vmg
tack
D4316-1