Raymarine ST60 Owner's Handbook Manual page 15

Chapter 1: Operation
The flow charts show the sequence of key presses and displays for the various
operating tasks. All key presses called for in the flow charts are momentary, unless
otherwise stated.
The type of data displayed (true or apparent) is indicated by a square marker on
the digital display adjacent to either the TRUE or APP legend, as appropriate.
If boat speed information is not available on the SeaTalk bus when TRUE is select-
Note:
ed, the digital display shows a series of dashes and the pointer will continue to show the
apparent wind direction.
Beaufort wind
speed
(not available on
ST60 Close
Hauled Wind)
disp
Maximum
wind
speed
disp
Maximum
true wind
speed
alarm
Using the disp key
Press
Wind speed
disp
Notes:
1. Screens annotated with * show the
alarm thresholds and are not available
on the ST60 Close Hauled Wind instrument.
To set up the alarm thresholds, refer to
Setting alarm conditions
2. All screens except Wind Speed are
temporary and will time out to the Wind
Speed screen after 7 seconds.
Press
tack
KTS
for 3s to reset
maximum wind speed
KTS
momentarily
disp
KTS
disp
(in text).
disp
Low apparent
wind angle
alarm
LO
disp
High
apparent
wind
angle
HI
alarm
disp
Low true
wind
speed
alarm
KTS
LO
3
D4315-1