Dimensions; Introduction - Sunfire SX SERIES Installation And Operation Manual

DIMENSIONS AND SPECIFICATIONS Continued

Dimensions

MODEL NO.
SX-4 24" (610mm)
SX-4-20 24" (610mm)
SX-6 36" (914mm)
SX-6-26 36" (914mm)
SX-6-24BG-2626 60" (1524mm)
SX-6-24BG-26 60" (1524mm)
SX-10-2626 60" (1524mm)
SX-10-26 60" (1524mm)
SX-1HT-4 36" (914mm)
SX-1HT-4-26 36" (914mm)
SX-24G-2 36" (914mm)
SX-24G-2-26 36" (914mm)
SX-24G-6-26 60" (1524mm)
SX-24G-6-2626 60" (1524mm)

INTRODUCTION

1. Check crate for possible damage sustained during transit.
Carefully remove unit from crate and again check for
damage. Any damage to the appliance must be reported
to the carrier immediately.
2. The wires for retaining the burners and other packing
material must be removed from units. Any protective
material covering stainless steel parts must also be
removed.
Part # 4515146 (02/29/08)
WIDTH DEPTH
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
33-1/8" (841mm)
HEIGHT
W/ LEGS W/O LEGS
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
38-1/2" (978mm) 32-1/2" (343mm)
3. All equipment is shipped from the factory with legs
fitted, unless otherwise specified. Where the range is to
be mounted on a dais or cove base, it is shipped without
legs. Legs must be fitted to the oven when it is installed
on a combustible floor.
4. The type of gas and supply pressure that the equipment
was set-up for at the factory is noted on the data plate
and on the packaging. This type of gas supply must be
used.
5. Do not remove permanently affixed labels, warnings or
data plates from the appliance, for this may invalidate the
manufacturer's warranty.
WEIGHT
LBS/KG
275/125
350/159
346/157
446/202
855/387
736/333
756/343
710/322
360/163
460/209
380/172
480/218
719/326
793/326
Page 5