Dvd - Sylvania LD320SS2 Owner's Manual

DVD

Settings are only effective when the unit is in DVD mode
and any discs should not be played back.
1
Use ◄/►to select a desired setting and an item, then press
ENTER to determine the setting.
LANGUAGE
AUDIO
SUBTITLE
DISC MENU
ENTER/OK
2
When the setting is completed, press SETUP to exit.
DVD Language Setting
You can change the desired language when playing back the disc.
1
Use ▲/▼ to select the item you want to adjust, then press
ENTER.
2
Adjust the following items.
AUDIO *1, *2
Select the desired audio language.
SUBTITLE *1, *2
Select the desired subtitle language.
DISC MENU *1
Select the desired language in DVD menu.
Note
• To change the on-screen language, call up [Language] from the
main menu and set the desired language. [Language]
*1
• Language options are not available with some discs.
• If [OTHER] is selected in [AUDIO], [SUBTITLE] or
[DISC MENU] menu, press 4-digit number to enter the code for
the desired language. [Language Code List].
• Only the languages supported by the disc can be selected.
*2
• Language setting for Audio and Subtitle are not available with
some discs.
- Use MODE to select subtitles available on the DVD.
- Use AUDIO to select audio available on the DVD.
• If the DVD's default settings for audio and subtitle are the same
language, the subtitles may not show unless you turn them on.
ORIGINAL
OFF
ENGLISH
(Default: ORIGINAL)
(Default: OFF)
(Default: ENGLISH)
p. 24
➠
➠ p. 27
DVD Audio Setting
Choose the appropriate audio settings for your equipment. It only
affects during the playback of DVD.
1
Use ▲/▼ to select the desired item, then press ENTER.
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ENTER/OK
2
Adjust the following items.
DRC (dynamic range control)
This function is available only on the discs which are recorded
in the Dolby Digital format.
Compress the range between soft and loud
ON
sounds.
OFF
No effects (original sound).
DOWN SAMPLING
This function is available only on digital outputting of a disc
recorded in 96kHz.
ON When outputting in 48kHz.
OFF When outputting the original sound.
Note
• When playing back a 96 kHz disc with the copyright protection
or when [Virtual Surround] is set to [1] or [2], the sound will be
down sampled at 48 kHz even if the [DOWN SAMPLING] is set
to [OFF]. [Virtual Surround].
DOLBY DIGITAL
Set to [BITSTREAM] when this unit is connected to a Dolby
Digital decoder.
BITSTREAM
Outputs Dolby Digital signals.
PCM
Converts the Dolby Digital into PCM. (2 channel)
English
ON
ON
BITSTREAM
(Default: ON)
(Default: ON)
p. 33
➠
(Default: BITSTREAM)
25