Power Management Setup; Acpi Function; Video Off Method - Fujitsu MS-6191 User Manual

Mainboard MS-6191

3.8 Power Management Setup

The Power Management Setup allows you to configure you system to most effectively save energy while operating
in a manner consistent with your own style of computer use.

ACPI Function

Power Management

Video Off Method

Suspend Type
Standby Mode
HDD Power Down
HDD Down In Suspend
Soft-Off by BTN
PWRON after PWR-fail
RI Resume/WOL
Modem Use IRQ
RTC Resume
Date (of Month) Alarm 0
Date (hh:mm:ss) Alarm 0
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Parallel Port
Serial Port
IRQ3 (COM 2)
IRQ4 (COM 1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
ACPI Function
This item allows you to enable/disable the Advanced Configuration and Power Management (ACPI). The settings
are: Enabled and Disabled.
Power Management
This category allows you to select the type (or degree) of power saving and is directly related to the following
modes:
1. Suspend Mode
2. HDD Power Down
There are three selections for Power Management, two of which have fixed mode settings.
Min. Power Saving
Max. Power Saving
User Defined (default)
Video Off Method
This determines the manner in which the monitor is blanked.
V/H SYNC+Blank
Blank Screen
DPMS (default)
CMOS Setup Utility - Copyright(C) 1984-1999 Award Software
Power Management Setup
Enabled
User Define
DPMS Support
PwrOn Suspend
Disabled
Disabled
Disabled
Instant-Off
Former-Sts
3
3
Disabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Minimum power management. Suspend Mode = 1 hr., and HDD Power Down = 15 min.
Maximum power management — Suspend Mode = 1 min., and HDD Power Down = 1 min.
Allows you to set each mode individually. When not disabled, each of the ranges are from 1
min. to 1 hr. except for HDD Power Down which ranges from 1 min. to 15 min. and disable.
This selection will cause the system to turn off the vertical and horizontal synchronization ports
and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
Item Help
Menu Level >
49