Irda Infrared Module Connector: Ir - Fujitsu MS-6191 User Manual

Mainboard MS-6191
Warning: Since the mainboard has the instant power on function, make sure that all
components are installed properly before inserting the power connector to ensure that no
damage will be done.

2.8 IrDA Infrared Module Connector: IR

The mainboard provides one 5-pin infrared (IR) connector for IR modules.
This connector is for optional wireless transmitting and receiving infrared
module. You must configure the setting through the BIOS setup to use the
IR function.
1
VCC NC IRRX GND IRTX
IR
21