Table of Contents
Advertisement
5
Make the required settings for the expansion card.
6
Push the board up to its slot (1).
Ensure that the end of a long expansion card without angle bracket fits into the corresponding
guide of the casing.
7
Press the expansion card into the slot so that it engages.
8
Fasten the expansion card into place with the screw (2).
9
If necessary, connect the cables.
10 Close the casing (see "Closing the casing").
If you have installed or removed a PCI card, please check the relevant PCI slot settings in the
BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
card documentation.
26
2
Advertisement
Table of Contents
