Setting Up The Pc; Connect The Monitor, Mouse And Keyboard - Fujitsu ESPRIMO P5100 User Manual

Setting Up the PC

CAUTION
When installing your PC, give consideration to the recommendations and safety notes.
Set up the PC only in its correct orientation. The points to observe are illustrated on the following
pages.
Do not expose the PC to extreme environmental conditions and protect it from dust, humidity and
heat.
When installing the PC, provide sufficient clearance around the PC, as indicated in the "Technical
data" chapter to ensure adequate ventilation. In order to avoid overheating, do not cover the
ventilation area of the monitor or the PC.
Do not place several system units one above the other.
The PC can be used either horizontally or vertically. We recommend that you place your equipment
on a surface with good anti-slip qualities. In view of the multitude of different finishes and varnishes
used on furniture, it is possible that the rubber / plastic feet of the devices will mark the surface they
stand on.

Connect the Monitor, Mouse and Keyboard

The ports for monitor, mouse and keyboard are on the rear and on the front of the system unit.
PS/2 keyboard port / purple
Monitor port / blue
Connecting the keyboard
Connecting standard keyboard
Use the supplied keyboard cable only.
Plug the round keyboard cable connector into the port marked with this symbol on the
system unit.
Connecting the mouse
Connecting a PS/2 mouse
Connect the PS/2 mouse to the PS/2 mouse port
Connecting USB mouse
Connect the USB mouse to the USB port
2
PS/2 mouse port / green
USB port / black
on the system unit.
on the system unit.