Toshiba D-V610KU Owner's Manual page 96

GENERAL T"IIIIIi' NG
SA }£ x
S< AS' 4
iZ} C} {Z}
_:_EV _AY FWS
#¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸% F ........................................... i_
>A{8:
TOSHIBA
SE-R0295
[] [] [] [] D
Press [SETUP] in stop mode and use
[A /V] to select "General Setting",
then press [ENTER]•
2
Use [A / V] to select "HDMI", then
_ress [ENTER].
3
• You cannot select HDMI when an HDMI cable is
not connected and the item is shown in grey
color.
Use [A / V] to select a desired item,
then press [ENTER].
Format
When you finish with the setting,
press [SETUP] to exit.
You can select the color space for HDMI output.
Set the appropriate color space for your display device.
Use [A / V] to select a setting, then press [ENTER].
• When the connected device is not compatible with the
Y/Cb/Cr HDMI signal is output as RGB regardless of the
settinc
Your setting will be activated.
96 EN
E9KGAUD D-VR610KU EN.indd 96 ,',/_+_,'/hx 2007/12/18 17:11:31