Toshiba D-V610KU Owner's Manual page 89

GENERAL rlIIIIF NG
Choose the appropriate audio setting for your external device.
It will only affect a disc playback.
Use [A/V] to select a desired item, then press [ENTER].
I
_1 Dynamic Range Control (Default: ON) I
Set to "ON" to compress the range between soft and loud sounds.
Use [4, / V] to select a setting, then press [ENTER].
_ayback
Your setting will be activated.
_1 Settings for PCM (Default : 48kHz)
Use [4, / V] to select a setting, then press [ENTER].
I
_1 Settings for Dolby Digital (Default : Stream)
Use [4, / V] to select a setting, then press [ENTER].
I
Your setting will be activated.
PCM : Converts the Dolby Digital into PCM (2 channel).
When your amplifier/decoder is NOT
compatible with Dolby Digital, set to "PCM".
Stream : Outputs Dolby Digital signals.
When your amplifier/decoder is compatible
with Dolby Digital, set to "Stream".
_1 Settings for DTS (Default : OFF)
I
Select a setting using [A / V], then press [ENTER].
_i_6_,_. i, ,_ ,_
°2;;2 ' ..... J,
Your setting is activated.
ON : Outputs DTS signals.
If your amplifier / decoder is compatible with
DTS, set to "ON".
OFF : No DTS signal is output.
If your amplifier / decoder is NOT compatible
with DTS, set to "OFF".
Your setting will be activated.
48kHz : If your amplifier/decoder is NOT compatible
with 96kHz PCM, select "48kHz". 96kHz sound
will be output in 48kHz.
96kHz : If your amplifier/decoder is compatible with
96kHz PCM, select "96kHz". 96kHz sound will
be output.
EN 89
E
©
_s
e
r;
@
@
2
©
2
II
@
E9KGAUD D-VR610KU EN.indd 89 ,',/_+_,/_b 2007/12/18 17:11:24