Toshiba D-V610KU Owner's Manual page 118

Dvd video recorder / video cassette recorder
Table of Contents

Advertisement

"IIIIIi'IOUBL MOOTINQ
DV signal cannot
be input.
The DVC cannot
be operated
with this
unit.
Certain functions
of the unit cannot
operate.
DV audio signal cannot
be switched.
• Before connection,
turn on the power supplies for both this unit and the
DVC, and make sure that these units are in stop mode.
• Only a "DVC-SD" signal can be input from the DVC to this unit. Other
types of signals are not supported.
• Do not connect
any device other than the DVC. Even ira recorder
or PC
with another
DV terminal
is connected,
the DV function
will not operate.
• If the DVC is not recognized
after connection,
turn offthe
power supply
for the unit and re-connect
the DVC.
• Signal input or DVC operation
from this unit may be disabled
depending
on the type of DVC.
• Ira DVC signal cannot be input, use an external
input
(L1/L2) for analog
connection
via audio/video
cables.
• DVC control
may be disabled
depending
on the type of DVC, even in a
mode other than camera mode. In this case, switch to DVD control and
execute the normal
recording
procedure
while operating
the DVC.
• Some functions
may not operate depending
on the type of DVC. For
example,
if the DVC does not support
slow playback
mode, the slow
playback
function
is disabled.
• With L3 (DV), the disc display menu does not appear unless disc
playback
is executed.
• For recording
with the DVC, the recording
audio signal can be setto
12
bits or 16 bits. However,
when 16-bit recording
mode is selected, audio
signal cannot
be switched.
To record an audio signal, set it to 12 bits.
There is no picture.
Picture noise appears.
Playback picture from the external
devices connected
to this unit is
distorted.
There is no sound.
Sound is noisy.
The disc does not play back.
• If the setup menu appears
on the TV screen, press [RETURN] to exit.
• Check if the progressive
scan mode is set correctly
according
to your TV
(page 94).
• Clean the disc with a cleaning
cloth.
• If the picture output signal from the external devices passes through this
unit to get to your TV, the copy protection
signal applied to some DVD could
affect the picture quality. Disconnect the playback device in question and
connect it directly to your TV.
• If you are using DIGITAL AUDIO OUTPUT (COAXIAL)jack, check the setting
in "Audio Out" (page 24).
• Clean the disc with a cleaning
cloth.
• Clean the disc with a cleaning
cloth.
• No disc is inserted.
• A blank disc is inserted.
• The disc is upside down. Insert the disc with the labeled
side facing up.
• The disc is not correctly
inserted.
• The unit cannot
play back certain discs (such as a CD-ROM) (page 10).
• The region
code on the DVD-video
does not match the unit (page 10).
• Moisture
has condensed
inside the unit. Remove the disc and leave the
unit turned
on for about 2 hours until the moisture
evaporates
(page 4).
• If the disc was recorded
on another
recorder, the unit cannot
play back
the disc if it was not finalized.
Playback image freezes for a second.
• During
the playback
of 2 layered disc, picture
may freeze for a moment
when the 1st layer switches to the 2nd layer. This is not a malfunction.
Discs recorded
on this unit cannot
be
• If you are using DVD-RW/-R or DVD+R, please ensure you finalized
the
played back on other DVD players,
disc after recording
(pages 30-32).
The disc does not start playback
from
• Resume playback
was activated
(page 58). Press [STOP n] twice.
the beginning.
• You have inserted
a disc whose title menu or DVD menu automatically
appears on the TV screen when it is first inserted.
The unit starts playing back the disc
• The DVD-video
features an auto playback
function.
automatically.
Some functions
such as stop, search,
• Depending
on the disc, you may not be able to do some of the
or slow-motion
playback
cannot be
operations.
Refer to the instruction
manual supplied
with the disc.
performed.
The language
for the sound track
• The title does not have the multilingual
audio tracks.
cannot be changed.
• The DVD-video
prohibits
the changing
of the language
for the sound
track.
EN
103
E
©
is
@
[;
@
@
R
©
2
R
Q
©
E
E9KGAUD
D-VR610KU
EN.indd
103
,,F_+_,/.h_
2007/12/18
17:11:36

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-vr610ku

Table of Contents