3
4
5
6
Advanced f eatures
137
Setting up the Network
2
Press tile (A/Y arrow) buttons to select Advanced Network
Setup, and then press tile OK button.
Press tile (A/V arrow) buttons to select IP Address Setup, and
then press tile OK button.
Select Auto Setup. Press tile (4/_
arrow) buttons to select
Off.
Press the (A/V arrow) buttons to highlight IP Address. Then
press tile OK button.
Press tile (4/_
arrow buttons to select tile IP Address field
and use tile 0-9 buttons to enter in a digit. Use tile ( _ arrow)
button to select tile subsequent fields. To save tile setting, press
tile OK button.
NOTE
IPaddress field numbers mustbebetween 0 and255,If youinputan
incompatible n umberandpress theOKbutton.Thefieldnumberwill
beresettotheprevious value.
7
Press the (_y
arrow) buttons to highlight
Subnet
Mask, and
edit in the same way as IP Address.
8
Press the (A/Y
arrow) buttons
to highlight
Default
Gateway,
and edit in the same way as IP Address.
NOTE
If youmanually settheIPaddress, y oumustnotusethesame IP
address foranyotherdevice. T heIPaddress you useshouldbea
private address. I f you donot knowthecorrectvaluestouse,contact
yournetwork administrator o r internet s ervice provider.
DNSSetup
NOTE
o**o WhentheDHCP functionofthe routerconnected t o this TVis
Off,setAutoSetupto Off,andmanually settheDNS address(es).
YourInternet S erviceProvider s houldhaveprovidedthese to
you.
¢ Thesettings in AutoSetuparelinkedto thoseselected in theIP
Address Setupmenu.If AutoSetupis setto On,thenAutoSetup
in the IPAddress Setupmenuwill alsobe setto 0n.
Auto setup:
1
Press the MENU
button.
Select NETWORK
> Network
Setup,
and then press the OK button.