Connecting Your W; Connecting A Vcr - Toshiba CX32H60 Owner's Manual

Connecting your TV
If you haven't connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section. (Cables
are not supplied.)
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use "F" connectors.
• Audio and video cables are usually color coded according to use:
yellow for video and red and white for audio. The red audio cable
is for the stereo right channel, and the white audio cable is for the
stereo (or mono) left channel. If you look at the rear panel of the
"IV, you wili see that the terminals are color coded in the same
manner as the cables.
• S-video cables provide better picture performance. S-video cables
can only be used with S-video compatible components.
• ColorStream
TM
cables come in sets of three and provide the best
picture performance. ColorStream cables can only be used with
ColorStream compatible components.
s-V_eo
cabfe
AN'_'NNA
Cc_x_4 ¢_de
AUDIO c_orstl_am
Cable Cabk_
Vl_l[o
Cable
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and to record
from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
Caution:
Do not plug the TVin until you havefinished
connecting all ofyour equipment.
"IV
Cable Lead-in from Cable Box
or Antenna I
Al_r 175111
_Tq OUT _T-2
S_reoVCR
_; _v'VJ_ II _ _ svom
*tAUDJO r_
ItAUD_O II AOD,O
,!i. ..... II .........
__ IN from ANT OLq" tO "IV
Caution:
ff using a mono VCR, connect L/Mono to
VCRAudio OUT using only one audio cab&
ffyou have a S-VHS VCR,use the So-video
connections and remove the video cable.
Do not connect the video cable and the
S-video cable to Video-7simultaneously.
2