Labeling Channels - Toshiba CX32H60 Owner's Manual

Labeling channels
Channel labels will appear over the channel number display each time
you turn on the T'v_ select a channel, or press the Recall button. You
can choose any four characters to identify the channels.
To create channel labels:
1. Select a channel you want to label.
2. Press MENU then press < or p. until the SET UP menu appears.
3. Press A or I' to highlight CH LABEL.
[CII.F_E AUDIO vlII_IIIF_IPBEFEB IC.CAPT
A_RE
CH LOCK START {4 _']
FAVORITE CH START [< I,]
OFF
T _IV.E_
_Mi _'1
OEMO STOP
START |4 _]
EHD [EXIT]
4. Press < or _ to display the CH LABEL menu.
SET/CLEAR will be highlighted.
5. Press < or _ to highlight SET.
LP_CTU_ I AUDIO m.i_mP_m PR_,Ep Fq CAF_TI
CN LABEL
_SET CLEAN
LABEL ....
SELECT I_ _
P_VE _
6. Press v to highlight LABEL.
CH LABEL
_ETiCLEAR SET
RECALL MUTE i
@ ®
0@@
®@@
©@@
CH RT,_
@@@
-- Channel
Number
Menu/Enter
_'& .41b
Exit
SELECT (_ )1
SET [ENT]
END [_XIT]
7. Assign the label to the channel. Press < or I_to enter a character
in the first space. Press the button repeatedly until the character
you want appears on the screen. Press ENTER.
8. Repeat step 7 to enter the rest of the characters.
If you would like a blank space in the label name, you must
choose an empty space from the list of characters. Otherwise, a
dash will appear in that space.
9. Press EXIT to clear the screen.
10. Repeat steps 1 through 8 for other channels. You can assign up to
32 labels.
To erase channel labels:
1. Select a channel with a label.
2. Press MENU then press _ or _ until the SET UP menu appears.
18