Starting Setup - Toshiba MW27H63 Owner's Manual

_l_*_I
setttp
The STARTING SETUP function help to install your unit easily. It leads you to the
Language selection, TV/CABLE selection and auto channel memory automatically.
iMPORTANT: Make sure that the antenna or cable TV system connection is
made!
®
1
Press POWER.
The starting setup function begins and the
Language setup menu appears on the screen.
Press A or T to select your desired language,
then press ENTER.
O
Press A or T to select "TV" or "CABLE", then
press ENTER.
Press A or T to select "START", then press
ENTER.
If you select "CANCEl" and press ENTER, the
STARTING SETUP stops and changes to the TV
screen.
N _
Now the "CH PROGRAM" and "AUTO CLOCK"
starts.
After the starting setup is completed, the TV
channel appears on the screen.
Notes:
• The starting setup function will work only when you press
POWER for the first time.
• In "AUTO CLOCK" setting, it may take more than 10 minutes
to read the EDS signal for one channel, which has only
"Time of day" or "Local time zone".
• The process of"CH PROGRAM" may take 15 - 30 minutes to
complete, depending on your regional cable service.
• If you press CANCEL in the process of"CH PROGRAM",
starting setup function is canceled.
®
I
18
5Y40 01Aindb 18
÷
12'21 2006 11:i8:15 AM