Cable Tv Connections - Toshiba MW27H62 Owner's Manual

tenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system.
If you are using a cable TV service (CABLE), see page 14 for Cable TV connections.
Antenna Antenna
jack jack
75 ohm coaxial cable
(not supplied)
300-75 ohm matching
transformer (supplied)
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
O
O
¢#
O
÷
Antenna
jack 300-75 ohm matching
transformer (supplied)
UHFI3e0a0'__ VHFi3e0a0d ohi_
(not supplied) (not supplied)
Connect the UHF 300 ohm twin-lead wire to the
combiner (not supplied). Connect the VHF 300
ohm twinqead wire to the 300-75 ohm matching
transformer. Attach the transformer to the combiner,
then attach the combiner to the antenna jack.
÷
Antenna
jack
_2otb_pprlie_(_
twin-lead wire
(not supplied)
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the combiner (not supplied).
Attach the combiner to the antenna jack.
13
5V60101A [E]p13-18 13 _ 2/22/06, 1:02 PM