Auto Power Off; Understanding The Power Return Feature; Appendix; Troubleshooting - Toshiba 27D46 Owner's Manual

Auto power off
The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its
broadcast for the day and stops broadcasting on that channel. This feature does not work in VIDEO mode.
Understanding the Power Return feature
If the power is cut off while you are viewing the TV and the power is resupplied, the Power Return feature will turn the TV
on automatically.
If the power is going to be off for a long time or you are going to be away from the TV for a long time, unplug the power cord
from the wall outlet to prevent the TV from turning on in your absence.
Appendix
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the symptom and some solutions.
Symptom Solution
Black box on screen o SelectOFF in the Closed Caption menu to turn off the Closed CaptionText mode.
o Ifyou connecteda high-definitionreceiver,480p progressivescan DVD player,or
othersimilar deviceto this TV,you must switchthe device's outputto 480i interlaced
mode first. Failureto do this will display the word"ColorStream"on a black screen.
TV will not turn on . Make surethe powercord is pluggedin, then pressPOWER.
o The remotecontrol batteriesmay be dead. Replacethe batteries.
No picture, no sound . Check the antenna/cableconnections.
No sound, picture OK . The sound may be muted.PressVOLUME.
o The station may have broadcastdifficulties.Try another channel.
. The MTSfeature may be in SAP mode.SelectSTR or MONO inthe MTSmenu.
Poorsound, picture OK o Thestation mayhave broadcastdifficulties.Try another channel.
. The MTSfeature may be in SAP mode.SelectSTR or MONO inthe MTSmenu.
Poor picture, sound OK o Check the antennaconnections.
. The station may have broadcastdifficulties.Try another channel.
o Adjustthe PICTUREmenu.
Poor reception of broadcast channels . The station may have broadcastdifficulties.Try another channel.
o Checkthe antennaconnections.
. Ifyou are using a video input, makesure the TVNIDEO buttonis set correctly.
Cannot receive above channel 13 o Make surethe TV/CABLEfeature in the SETUPmenu is set to "CABLE."
Unable to select a certain channel o The channel may be blocked bythe V-Chipfeature or CH LOCKfeature, or erased
withthe add/erasefeature.
Cannot access signal input sources (Video1, o Checkthe VIDEO LOCKfeature.
Video2 and ColorStream and/or Channels 3 and 4
Multiple images o The station may have broadcastdifficulties.Try another channel.
. Use a highly directionaloutdoor antenna.
Poor color or no color o The station may have broadcastdifficulties.Try another channel.
. Adjustthe TINT and/or COLORin the PICTURE menu.
o Ifyou changethe directionof the TV while it is turned on, the picture could suffer
from color shading.If so, turn off the TVand allow it to cool for several hours before
turning it on again.
No stereo or SAP sound from a . Make surethe MTS feature (in theAUDlO menu) is set properly.
known MTS broadcast
The V-Chip password does not work . Change or resetyour password.
(U.S. V-Chip system only)
The remote control does not operate . Make surethe TV • CBL/SAT• VCR • DVD mode is set properlyon the remote
control.
. Removeall obstructions betweenthe remotecontrol and the TV.
o The remotecontrol batteriesmay be dead. Replacethe batteries.
The front panel buttons do not operate • Check the FRONTPANELLOCKfeature.
Digital broadcasting screen problem • Check the digitalsignal strength.
Closed Caption box appears with no text • Make surethe Closed Caption"TextColor" and"BackgroundColor" are not set to
the same color (see page31).
35
J3W41121A(E) P31-Back 35 14/03/2006, 3:40 PM