Installation Of Fan - Heatilator A36C Owner's Manual

1. Bend tab
to open.
Bottom Flange
Figure 7.2 Prepare Junction Box Bracket
2. Slide the flange of the junction
box through the slot in the
bracket.
Figure 7.3 Position Bracket on Junction Box
This tab should
be bent back
under the flange
to help secure
the bracket to
the junction box.
Figure 7.4 Secure Bracket to Junction Box
Heatilator • A36C & A42C • 28396 Rev Y • 10/06
Figure 7.5 Attach the Heat Shield
Figure 7.6 Attach the Junction Box
C. Installation of Fan
Follow installation instructions supplied with fan kit.
CAUTION
Shock Risk
• Do NOT remove grounding prong from
plug.
• Plug directly into properly grounded three-
prong receptacle.
• Route cord away from appliance.
• Do NOT route cord under or in front of
appliance.
Note: Do NOT wire 110
VAC to wall switch.
25