Troubleshooting - Meridian 500 User Manual

Troubleshooting

This section describes problems you may encounter when using
the compact disc transport, and includes suggested solutions.
If these suggestions fail to cure the problem, please contact
your Meridian dealer for further assistance.
No lights are displayed when
switching on
Check that your AC power supply is connected correctly.
Check that the ON OFF switch on the back panel
is in the ON position.
Check that the fuse on the compact disc transport
back panel and the fuse in the unit's power plug
have not blown; see To change the mains fuse, page 25.
The drawer will not open
Check that the standby display is shown.
If the standby display is shown:
Switch off the compact disc transport and disconnect it from
the AC power supply.
Try opening the drawer gently, by hand. Do not
use force.
Restore power to the compact disc transport.
There is no sound when playing a disc
Check the digital connection between the compact disc
transport and the digital converter or digital loudspeakers.
Check that your preamplifier is switched on, and the volume is
at an appropriate level.
Check that the compact disc transport is connected correctly
to the other components of your system; see Connecting the
compact disc transport, page 19.
Check that the correct source has been selected on your
preamplifier.
Check that the Pause indicator is not lit.
Try playing another disc. If this disc works, check the problem
disc for signs of dirt or damage.
23