Meridian 500 User Manual page 17

To programme by specifying the
tracks you do not want to play
Choose one of the tracks you do not want to play, as
described above.
The display will show the track
number; for example:
Press Clear (remote only).
The display will change to:
You should clear the track within two seconds, or it will begin to
play.
The track will be labelled Clear. All the other tracks are initially
programmed to play, and will be labelled Store.
To add a track to a selection
Select the track you want to add, as described above.
Press Store (remote only).
The Clear label will change to Store to indicate that the track is
stored.
To remove a track from a selection
Select the track you want to remove, as described above.
Track 12
The Store label will change to Clear to indicate that the track has
been cleared.
Clear 12
To clear a programme
The display will show C.P. (Cancel
Programme):
A programme is automatically cancelled if you open the disc
drawer, or press Off.
Press Clear (remote only).
Press • (Stop) twice.
C.P.
13