Meridian 500 User Manual page 25

To connect to a 566 Digital to
Analogue Converter
566 Digital to Analogue Converter
D1
Digital lead
500 comms lead
Connect the DIGITAL OUTPUT on the back panel of the
compact disc transport to the D1 input of the 566 Digital to
Analogue Converter, using the digital lead provided.
500 Compact Disc Transport
DIGITAL COMM
OUTPUT
To connect to Meridian 600 or 200
Series equipment
If your system includes any Meridian 600 or 200 Series units,
with 600 COMMS or 200 COMMS sockets, you should set all
the 500 Series units to 200 COMMS operation using the
following procedure:
Turn off the compact disc transport, using the power switch
on the back panel.
Turn on the power again while holding down the Off key on
the front panel.
The display will show the current
setup:
Press ] (Next) on the front panel
to change to Type 2:
Switch the power off and on again to restore the compact
disc transport to normal operation.
To return to 500 COMMS operation repeat the above
procedure, and select Type 1.
Type 1
Type 2
21