Snapper 2690978 LT2146 Operator's Manual page 29

Troubleshooting the Mower
PROBLEM LOOKFOR REMEDY
Lift linkage not properly See authorized dealer.
Mower will not raise, attached or damaged.
Mower not leveled See authorized dealer.
properly.
Mower cut is uneven. Tractor tires not properly See Check Tire Pressure section.
inflated.
Engine speed too slow. Set to full throttle.
Mower cut is rough Ground speed too fast. Slow down.
looking.
Mower has other problem. See authorized dealer.
Engine speed too slow. Set to full throttle.
Ground speed to fast. Slow down.
Dirty or clogged air filter. See Servicing Air Filter section.
Cutting height set too low. Cut tall grass at maximum cutting height during first pass.
Engine staffs easily with
mower engaged. Discharge chute jamming. Cut grass with discharge pointing toward previously cut area.
Engine not up to Run engine for several minutes to warm-up.
operating temperature.
Starting mower in tall Start the mower in a cleared area.
grass.
Excessivemower vibration. Mower has other problem. See authorized dealer.
Engineruns and tractor PTO not engaged. Engage the PTO.
drives, bat mower will not
Mower has other problem. See authorized dealer.
drive.
(_ 29