Steering Drag Link; Steering Tie Rod; Blade Engagement Mechanism; Park Brake Lever - Snapper LT180H331BV series I Safety Instructions & Operator's Manual

Section 3 - MAINTENANCE
6. Steering Drag Link
Lubricate both ends of steering drag ink with a small
amount of SAE30 oil. See Figure 3.10.
LINK
LUBRICATION
POINT
FIGURE 3.10
3.3.4. TRACTOR LUBRICATION
(Continued From Previous Page)
7. Steering Tie Rod
Lubricate both ends of steering tie rod with a small
amount of SAE30 oil. See Figure 3.11.
LUBRICATE
BOTH ENDS
OF TIE ROD
LUBRICATE
COMPONENTS ON
UNDERSIDE OF
TRACTOR
BLADE
• ::" _, ENGAGEMENT
LEVER
FIGURE 3.12
9. Park Brake Lever
Using general purpose grease, lubricate the park
brake lever mechanism pivot points, which are
located on the left hand underside of tractor. See
Figure 3.13. Mechanism with a thin coat of 30 wt.
motor oil.
LUBRICATE COMPONENTS ON
UNDERSIDE OF TRACTOR
PARK BRAKE
LEVER
FIGURE 3.11
8. Blade Engagement Mechanism
Using SAE30 oil, lubricate the blade engagement
mechanism pivot points, which are located on the
R.H. underside of tractor. See Figure 3.12.
3.4
FIGURE 3.13
10. Deck Lift Mechanism
Lubricate all wear and pivot points of the deck lift
SERVICE - ANNUALLY
Perform all maintenance as described in Section
"SERVICE - EVERY 25 OPERATING HOURS". Also
see service schedule.
3.4.1. ENGINE
1. Service engine according to engine owner's
manual.
16