Seasonal Storage - Poulan Pro 1420 Instruction Manual

Cutters De 1 Gauge
Drive Links
6. Slide the chain between the housing
and the sprocket. Place chain
around the sprocket and fit the drive
links into the guide bar groove and
then around guide bar nose.
Sprocket
_J_
Bar\ .,,," ,
Right Housing "-_w
7. Hold the guide bar against the saw
frame and install the bar clamp plate.
Be sure the tab on the bar clamp
plate is toward the rear of bar.
Adjusting Pin Slot
.,'z_L Tab
Clamp J I_" BarNuts.J._'_',)"_
Plate / I
8. Secure the guide bar and bar clamp
plate with the bar nuts; tighten finger
tight only.
CAUTION: If saw chain is installed
backwards, the saw will vibrate exces-
sively and will not cut wood.
CHAIN ADJUSTMENT
See CHECK CHAIN TENSION in the MAIN-
TENANCE section.
CUSTOMER SERVICEABLE PARTS
_/LWARNING: Use of any other ac-
cessory or attachment might present a
risk of injury to the operator.
REPLACEMENT PART
Bar Mounting Nuts
Oil Cap
Guide Plate
Safety Lock Button
Bar Adjusting Screw
Bar Adjusting Pin
Spacer
Spacer Screw
File (5/32" dia.) Twin Pak
Xtra GUARD® Chain -14"
Xtra GUARD® Chain - 16"
Lo-Kick® Guide Bar - 14"
Lo-Kick® Guide Bar - 16"
Bar & Chain Lubricant -1 qt.
Bar & Chain Lubricant -1 gal.
PART NO.
530015251
530029282
530029285
530025873
530015514
530023492
530015832
530015835
952055085
952051209
952051211
952044368
952044370
952030129
952030130
_WARNING: Perform the following
steps after each use:
• Allow the motor to cool before storing
or transporting.
• Store chain saw and extension cord in
a well ventilated area
• Store chain saw with all guards in
place and position chain saw so that
any sharp object cannot accidentally
cause injury.
• Store chain saw unplugged, well out of
the reach of children.
SEASONAL STORAGE
Prepare your unit for storage at the
end of the season or if it will not be
used for 30 days or more.
If your chain saw is to be stored for a
period of time:
• Clean it thoroughly before lengthy stor-
age.
• Store in a clean dry area.
• Lightly oil external metal surfaces and
guide bar.
• Oil the chain and wrap it in heavy pa-
per or cloth.
• Use bar sheath to cover bar.
14