Using The Canopy - Fisher-Price 79652 User Manual

Use
To Unfold
1
Sides of Base Wire
• Position the product upright on a flat surface.
• Grasp both sides of a base wire.
• Pull both sides of the base wire outward and then let the
base wire rotate down.
Note: If the base wire does not freely rotate down, pull the
sides of the base wire further outward.
Groove
2
Sides of Base Wire
• Lift the product up slightly so that each side of the base
wire "snaps" into the groove in each frame. Make sure you
hear a "snap" .
Frame
Groove
PUSH
Frame
Groove
3 Base Wire
• Push down on the product to be
sure each side of the base wire is
in the correct position. The base
wire should rest in the groove in
each frame.
• Repeat Use steps 1- 3 to unfold
the other base wire.

Using the Canopy

Canopy Up
4
• Adjust the canopy up or down.
7
PUSH
CORRECT
Canopy
Down